Toggle menu
Toggle personal menu
Not logged in
Your IP address will be publicly visible if you make any edits.
Revision as of 13:33, 25 July 2024 by 1F616EMO (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Drawers are interconnectable storage units, each storing 24 stacks of items. They can be upgraded to expand their capacity. If hooked up to a drawer controller, items going into the controller will find their way to the respective drawer.

A basic drawer system containing various items.

Usage

Place down the drawers, optionally connecting them up with wooden trims.

To put items into the drawer, right-click or tap the slot with the item you want to. To put all items of that type, double-right-click or double-tap the slot. Note that each slot can only hold one type of item, and unstackable items (e.g. tools) are not supported.

You can also use the drawer controller to put items inside the system without worrying about where the respective drawers are. Right-click a controller, then put your items into the middle slot.

To take items from the drawer, punch the slot. The items will go into your inventory. When a drawer is dug, the items inside drop out.

With Pipeworks and Digilines

Drawers can be used with Pipeworks like normal chests.

The drawer controller takes items from its side, and spits items out from the back of queried via Digilines. The Digiline interface accepts one of the following:

-- These examples assume a Luacontroller environment, taking 30 dirts from the drawer system

-- An ItemString: <technical name> <count>
digiline_send("the_drawer", "default:dirt 30")

-- A table: { name = <technical name>, count = <count> }
digiline_send("the_drawer", {
    name  = "default:dirt",
    count = 30,
})

Variants

Variants of drawers are available for a vast of wood types. For each wood type, drawers can be divided into two or four storage slots, sharing the capacity.

Variant Capacity per slot
1x1 24 stacks
(3168 items)
2x1 12 stacks
(1584 items)
2x2 6 stacks
(792 items)

Upgrades

The capacity of drawers can be upgraded via drawer upgrades. Despite implying "multiply by  " in their description, what they do is an addition operation summing up all the upgrades. The additional capacity are shared evenly among slots.

Variant Added capacity per drawer
Iron Drawer Upgrade (x2)
drawers:upgrade_steel
24 stacks
(3168 items)
Gold Drawer Upgrade (x3)
drawers:upgrade_gold
48 stacks
(4,752 items)
Obsidian Drawer Upgrade (x4)
drawers:upgrade_obsidian
72 stacks
(7,128 items)
Diamond Drawer Upgrade (x8)
drawers:upgrade_diamond
168 stacks
(16,632 items)
Mithril Drawer Upgrade (x13)
drawers:upgrade_mithril
288 stacks
(28,512 items)
Warning: If you remove an upgrade, the items may overflow. Any items exceeding the limit will be dropped out of the drawer.